Agricultural Spray Foam Insulation Jacksonville, FL
Seal drafts, moisture and Florida heat out of your poultry houses, barns and cold storage with spray foam installed by our own crew.
- Family Owned & Operated
- Owner On Every Job
- 5-Star Rated On Google
Spray Foam Insulation for Farm and Ag Buildings
Agricultural buildings face the full force of the Northeast Florida climate. Long, hot summers, high humidity and metal roofs and walls make it hard to hold steady conditions inside, whether you’re housing animals or storing product.
Spray foam insulates and air-seals in one step, closing the gaps where heat, drafts and moisture get in while helping keep conditioned air inside the building and sealing out heat and moisture, which can also reduce HVAC and ventilation strain and extend equipment life. Clark Spray Foam insulates agricultural buildings around Jacksonville and the surrounding region with our own crew, and owner Michael Clark is on every job.

Agricultural Buildings We Insulate
Poultry houses
Long buildings with large roof areas take on a lot of heat. Insulating and sealing the envelope helps your ventilation and cooling equipment hold steadier temperatures.
Swine barns and farrowing houses
Sealing drafts and air leaks gives you more control over the conditions inside, so your equipment isn’t fighting the outdoor air.
Equine barns
Insulation under metal roofs cuts down on heat buildup and condensation in stalls, tack rooms and feed areas.
Cold storage facilities
Keeping stored goods at a steady temperature takes a tight, well-insulated envelope that helps reduce energy loss. Spray foam reduces the heat and humid air your cooling system has to work against.

Holding Steady Temperatures
Temperature swings make it harder and more expensive to run an ag building. Heat pouring through an uninsulated metal roof and outdoor air leaking through gaps force fans, coolers and refrigeration equipment to work harder to keep up.
Spray foam slows that heat and stops the air leaks at the same time. Air moving through gaps and cracks matters as much as R-value, and fiberglass doesn’t stop air movement on its own. With a sealed envelope, your equipment runs less, and spray foam can save up to 50% on energy costs.
Condensation, Moisture and Drafts
Condensation is one of the most common problems in metal ag buildings. When warm, humid air hits a cooler metal roof or wall, it condenses and can drip onto feed, bedding, equipment and stored goods. Over time, that moisture also raises the risk of mold.
Spraying foam directly onto the metal keeps humid air from reaching it, and the seamless layer seals out drafts around framing, seams and fasteners for better moisture control. That reduces the risk of mold and humidity problems inside the building. We use the same approach on warehouses and other commercial and industrial metal buildings. In residential buildings, that sealed foam layer can also help reduce outside noise.
Why Closed-Cell Foam Fits Agricultural Buildings
Most agricultural projects call for closed-cell spray foam. Here’s why:
Moisture resistant
Closed-cell foam doesn’t absorb water and acts as a vapor retarder at about 2 inches, which matters in damp, humid buildings.
Durable and rigid
It’s a rigid foam that adds racking strength to walls and roofs, and it won’t shift, settle or deteriorate over time.
More R-value per inch
At about R-6 per inch, closed-cell delivers more insulation in a thinner layer than open-cell foam, which is less dense. In contrast, open cell spray foam is more flexible, easier to install, and typically less expensive than closed-cell foam.
Our Recent Work
A few photos from recent Clark Spray Foam jobs. Our own crew does every one, with the owner on site.



Why Choose Clark Spray Foam
Family Owned & Operated
Owner Michael Clark is on every job, so you’re never handed off after the quote.
We Never Subcontract
Our own crew does every job, start to finish.
Over 15 Years of Experience
Over 15 years in the industry, serving homes and businesses across Northeast Florida.
Free Quotes & Financing
Request a quote online and get 10% off your project. Financing through Acorn Finance.
What Our Customers Say
5-star rated on Google. Customers often mention our punctual, professional crews, clean job sites and clear communication.
Agricultural Spray Foam Insulation FAQs
What type of spray foam is best for agricultural buildings?
Closed-cell spray foam is usually the best fit for agricultural buildings. It doesn’t absorb water, acts as a vapor retarder at about 2 inches, adds racking strength and provides about R-6 per inch. Those traits suit metal roofs and walls, damp conditions and buildings that take a lot of wear. See our open-cell vs. closed-cell comparison for details.
Can spray foam stop condensation on a metal barn roof?
Yes, spray foam helps control condensation on metal roofs by keeping warm, humid air from reaching the cooler metal. Closed-cell foam is sprayed directly onto the underside of the roof, where it insulates, air-seals and acts as a vapor retarder at about 2 inches. Less condensation means less dripping onto feed, bedding, equipment and stored goods, and a lower risk of mold.
Does spray foam work in cold storage facilities?
Yes, spray foam insulation services work well in cold storage facilities because they both insulate and air-seal the building envelope. Keeping stored goods at a steady temperature depends on limiting heat gain and stopping warm, humid air from leaking in while also improving indoor comfort in adjacent working areas. A sealed envelope means your refrigeration equipment has less to fight against, and spray foam can support long-term energy savings, with some buildings saving up to 50% on energy costs.
Can you insulate an existing poultry house or barn?
Yes, we insulate existing agricultural buildings as well as new construction. Spray foam can be applied directly to metal roofs and walls and around framing, so it adapts to the layout of buildings that are already standing. If old insulation is wet, damaged by pests or falling down, our crew can handle insulation removal before installing new foam, which is often the right first step in older homes but can also be needed in ag buildings.
How does spray foam help control drafts in a barn?
Spray foam controls drafts by expanding into gaps, seams and cracks and forming one seamless air barrier. Barns and ag buildings often have leaks around framing, fasteners and panel joints that let outdoor air move freely. Sealing those leaks gives your fans and ventilation equipment more control over the air inside, instead of competing with uncontrolled drafts.
What areas do you serve for agricultural insulation?
We serve agricultural properties throughout Jacksonville, St. Augustine, Fernandina Beach, Neptune Beach, Ponte Vedra and surrounding Northeast Florida. Clark Spray Foam is family owned and operated, we never subcontract and owner Michael Clark is on every job. We provide a free written estimate, and you can contact the company online to request one and get 10% off your project.
Related Services
Commercial spray foam solutions for commercial properties, including offices, retail spaces, warehouses, industrial facilities, and other commercial buildings. These services are tailored to the specific needs of property owners, builders, and contractors.
An honest side-by-side of open-cell spray foam and closed-cell options for different residential applications and commercial applications. Choosing between materials depends on the space, and proper installation requires precise chemical mixing and special application techniques for safety and performance.
How spray foam works, where it goes, and why our foam insulation services suit Florida heat and humidity in residential homes and commercial spaces. They’re available for residential and commercial properties, fill hard-to-reach spaces, improve comfort, help interiors stay cool, and support saving on long-term energy bills.
Old, damaged or contaminated insulation of any type, removed and replaced in attics, wall cavities, and other spaces, with options including fiberglass insulation. It’s also a cost-effective solution for many spaces, and blown-in fiberglass can boost indoor comfort after removal and replacement.
Get Your Free Quote
Request a quote online and get 10% off your project. Prefer to talk it through? Call us Monday through Friday, 8 AM to 5 PM.
- Family owned, owner on every job
- We never subcontract
- Financing available
- Serving Jacksonville, St. Augustine, Fernandina Beach, Ponte Vedra and surrounding Northeast Florida
