Insulation Removal in Jacksonville, FL
We remove old, damaged or contaminated insulation of any type from attics, walls and crawl spaces, then reinsulate so your space starts fresh.
- Family Owned & Operated
- Owner On Every Job
- 5-Star Rated On Google
When Old Insulation Needs to Come Out
Insulation is supposed to do its job quietly for years. Once moisture, pests, smoke or dust get into it, though, it stops protecting your home or building and starts holding onto problems instead. Adding more on top only covers them up.
Clark Spray Foam removes fiberglass, batt, cellulose and spray foam insulation from attics, walls and crawl spaces in homes and commercial buildings across Jacksonville and Northeast Florida. We never subcontract, and owner Michael Clark is on every job.
Most removal projects end with new insulation, so you get a clean space and better performance in one project instead of two.
Common Reasons to Remove Insulation
Any one of these can be reason enough to take old insulation out instead of working around it.
Mold or Mildew
Insulation soaked by a roof leak, plumbing leak or high humidity can develop mold or mildew. Removing the affected material is the cleanest way to deal with it.
Rodents and Insects
Rodents and insects tunnel through insulation, nest in it and leave droppings behind. Contaminated insulation should come out rather than be covered over.
Smoke and Pet Odors
Insulation absorbs odors from smoke and pets, and the smell can linger long after the source is gone. Taking it out removes the material holding the odor.
Dust and Allergens
Older insulation collects dust and allergens over the years. Replacing it can mean fewer allergens and dust in your space.
Renovations
Remodels and additions often expose or disturb existing insulation. Removing it gives the project a clean starting point and a chance to upgrade.
Energy Upgrades
If you’re moving to spray foam or a higher R-value, clearing out tired, underperforming insulation lets the new system start from a clean slate.
How Insulation Removal Works
Every building is different, but our removal process follows the same four steps.
Inspect
We look at the insulation, the space around it and any signs of what caused the damage. Then we explain what needs to come out and what we recommend putting back.
Remove
Our crew takes out the old insulation along with any debris or nesting material mixed in with it. We work carefully and keep the job site clean.
Prepare the Space
With the old material gone, we clear the area so it’s ready for new insulation. If a leak or pest entry point caused the problem, this is the time to get it fixed.
Reinsulate
We install new spray foam or fiberglass suited to the space and your goals, so the area is fully insulated again.
Attics, Walls, Crawl Spaces and Commercial Buildings
Attics deal with intense heat, roof leaks and rodents, so they’re a frequent source of damaged insulation. Our attic insulation removal page covers the signs and steps specific to that space.
Walls are usually cleared during a renovation, when the drywall is already open. It’s the right moment to replace old batts before the walls are closed back up.
Crawl spaces can hold insulation that sags, absorbs moisture or becomes a nesting spot for pests. Removing it clears the way for new insulation that fits the space.
Commercial projects such as office renovations, apartment buildings and convenience stores get the same careful approach. We talk through access and work areas before we start, so you know what to expect.
Reinsulating With Spray Foam or Fiberglass
Removal is the best time to rethink what goes back in. In Northeast Florida’s hot, humid climate, where the AC air handler and ductwork often sit in the attic, the type of insulation you choose makes a real difference.
Spray foam insulation insulates and air-seals in one step, reduces the risk of mold and humidity problems, and won’t shift, settle or deteriorate over time. It can save up to 50% on energy costs, and on the underside of the roof deck it brings the attic and its AC equipment inside the conditioned space.
Fiberglass insulation, in batts or blown in, restores R-value on attic floors and in open walls. It doesn’t stop air movement on its own, and air sealing matters as much as R-value, so we’ll talk through both.
Our Recent Work
A few photos from recent Clark Spray Foam jobs. Our own crew does every one, with the owner on site.
Why Choose Clark Spray Foam
Family Owned & Operated
Owner Michael Clark is on every job, so you’re never handed off after the quote.
We Never Subcontract
Our own crew does every job, start to finish.
Over 15 Years of Experience
Over 15 years in the industry, serving homes and businesses across Northeast Florida.
Free Quotes & Financing
Request a quote online and get 10% off your project. Financing through Acorn Finance.
What Our Customers Say
5-star rated on Google. Customers often mention our punctual, professional crews, clean job sites and clear communication.
Insulation Removal FAQs
How do I know if my insulation needs to be removed?
Your insulation likely needs to be removed if it’s wet, moldy, contaminated by rodents or insects, or holding smoke or pet odors. Matted, crumbling or stained insulation is another sign. If the damage is limited to a few spots, targeted insulation repair may be enough, and an inspection will tell you which makes more sense.
What types of insulation can you remove?
We remove fiberglass, batt, cellulose and spray foam insulation. That covers what’s found in most attics, walls and crawl spaces in Jacksonville-area homes and commercial buildings. Each material comes out a little differently, and we’ll explain the approach for your space before any work begins.
Can you install new insulation after removal?
Yes, most of our removal projects finish with new insulation. We install spray foam, blown-in fiberglass and fiberglass batts, so we can recommend the right fit for each area instead of a one-size-fits-all answer. Having one crew handle both removal and reinsulation keeps the project simpler for you.
Should the cause of the damage be fixed before new insulation goes in?
Yes, whatever damaged your insulation should be fixed before new insulation is installed. That might mean repairing a roof or plumbing leak or sealing rodent entry points. Removal often makes these issues easier to spot, since the old insulation is no longer hiding them, so the order works out naturally: remove, fix, then reinsulate.
Will insulation removal make a mess in my home or business?
Insulation removal is dusty work, but our crew keeps it to the work area and cleans up before we leave. Customers often mention our clean job sites, professional crews and clear communication. Before we start, we’ll walk you through what to expect so there are no surprises.
How much does insulation removal cost?
The cost of insulation removal depends on the size of the area, the type and condition of the insulation, and what goes back in. Clark Spray Foam offers free quotes, and requesting your quote online takes 10% off the project. Financing is also available if you’d like to spread out the cost.
Related Services
Rodent-damaged, moldy or matted attic insulation cleared out for a fresh start.
Gaps, wet spots and areas disturbed by other trades, fixed without starting over.
How spray foam works, where it goes and why it suits Florida heat and humidity.
Blown-in fiberglass and batts for vented attics, walls and open framing.
Get Your Free Quote
Request a quote online and get 10% off your project. Prefer to talk it through? Call us Monday through Friday, 8 AM to 5 PM.
- Family owned, owner on every job
- We never subcontract
- Financing available
- Serving Jacksonville, St. Augustine, Fernandina Beach, Ponte Vedra and surrounding Northeast Florida